The Bennysystem is easily recharged. Just a few simple steps to follow, and Bennysystem is once again at your defence.

1. Re-attach the strap right at the bottom until you hear two clicks. [Picture 1]

2. Open the zip in the lining near the top part of the bag, lift the mechanism located at the bottom, held down by Velcro, enough to unscrew the used aerosol can. [Picture 2]

3. Take the threaded sleeve for recharging and the valve seat wrench– make sure the air-bag is completely flat. [Picture 3]

4. Screw on the sleeve, using the valve seat wrench, all the way down to where the aerosol can was located, bringing the mechanism’s internal spring back into a loaded position. [Picture 4]

5. Unscrew the sleeve. Be careful: you know you will be doing this correctly if the sleeve comes away after about two turns, and until it’s completely unscrewed. If, instead, it is difficult to unscrew, repeat the procedure making sure the sleeve is screwed on all the way. At this point, the spring will be in a loaded position and the sleeve will come away easily. [Picture 5]

6. Insert the new aerosol can, re-position the mechanism on the Velcro located at the bottom of the bag and adjust the lining as it was originally. Close the zip and, with your hand placed inside the bag, press downwards so to allow any residual air out. [Disegno 6]

In order to guarantee the contents of your bag will be completely expelled, we suggest you do not place heavy objects inside the bag which could prevent the bag from completely emptying out.